Ski and Snowboard Tuning Tools - Base Bevel

Choose from 0.5 (shown), 0.7 and 1.0 degree
Needed to accurately 'base bevel' the base edges of all new age skis & boards!

Note: All brand new skis need to be prepared first before being used (even if they are new from the factory).

Have your skis or board ever felt 'catchy' or like they won't 'skid or steer' in certain snow conditions? Yes? This is due to inadequate base bevel. This can be very dangerous! Here are some tips:

0.5 - Used on all skis and boards and all slalom skis! For advanced to expert racers who pure carve the majority of their turns, like aggressive and responsive turn intiation and grip! You always start with 0.5, test it, then if it's too aggressive move up to 0.7 or 1.0 degree bevel guides.
0.7 - Used when a 0.5 degree base bevel is a little 'too aggressive' or 'too catchy'.
1.0 - Used for easier 'steering' AND/OR on the front of skis (typically in GS on the first 5-15cm) for easier 'turn intiation' often called 'schmearing'. Also used frequently by ski teachers working with lower end clients where steering skills are used a lot, freeriders and for the park and pipe. Recreational skiers commonly prefer 1.0 for all around use because it allows the skis to steer easier!

As you can see all 3 are utilized from the beginner to expert and therefore a lot of your decision is based on your own personal preference, skill level, ski/board type & snow conditions. Always start with a 0.5 degree and increase! You can't go from a 1.0 degree bevel back to a 0.5 degree bevel w/o grinding your skis/board flat! Note: Sidecut Diamond Stones, Ceramic Stones have been designed to fit in all Base Bevel Guides making an extra smooth finish.